: Open the VCI Config utility via the "Net" button in VCDS, go to the tab, and select Check for updates
A cheap hardware programmer used to flash Atmega chips.
This rarely happens, but if it does, it usually means there is a corruption in the interface's internal firmware or a synchronization issue with the Ross-Tech servers.
To prevent a working or newly reinstalled clone setup from getting revoked in the future, you must block the software from accessing the internet. Open the settings on your PC. Click on Advanced Settings in the left sidebar. Select Outbound Rules and click New Rule . vcds revoked fix
This comprehensive guide explains why this happens, how to fix a "revoked" VCDS cable, and how to prevent it from happening again in 2026. What Does "VCDS License Revoked" Mean?
Discovering that your Ross-Tech VCDS (Vag-Com Diagnostic System) interface status has been changed to "Revoked" or "Blocked" can immediately halt your automotive diagnostic work. This issue typically triggers an error message stating or "Interface Not Found" when you attempt to test the connection or scan a vehicle.
Genuine Ross-Tech interfaces (HEX-V2, HEX-NET) are built to withstand updates and come with lifetime support. : Open the VCI Config utility via the
Reading Time: 8 Minutes
If you are a frequent user, the best solution is to ensure your hardware is genuine. If you’d like, I can: Explain how to distinguish a genuine cable from a clone. Provide steps to check your VCDS firmware version. Let me know how you'd like to .
If you are still having issues with your cable, it's often best to reach out to the manufacturer directly. Are you using a or a clone ? Knowing this can help me provide more specific steps. Open the settings on your PC
By following the VCDS revoked fix outlined in this article, you should be able to resolve any issues with your VCDS license and continue to enjoy the benefits of using this powerful diagnostic tool.
Note the current VID and PID numbers (they are often displayed as VID_0000&PID_0000 if revoked). Step 3: Flash the Correct IDs Open with your VCDS cable plugged into the PC. Click on Devices > Scan and Parse .
To fix the interface, it helps to understand what happened under the hood. Ross-Tech implements strict anti-piracy measures within their software distributions.